HD19 – Micro-HD Bullet Camera

The HD19 has the option for different cable configurations and different lens options.

Cable Type

The HD19 offers a number of different cabling options:

Standard Pigtail:  RV-CAM-HD19-(_._MM-__)

The standard pigtail includes a cable that extends from the back of the camera, to a junction with built-in menu control and then to connections.  The cable extends 17.5″ from the back of the camera to the junction with individual breakouts extending another 8″.  Breakouts include: HD Video (BNC), NTSC/PAL Video (BNC), and Power (2.1×5.5mm Barrel).

HRS Power Pigtail(for Rugged Video Systems): RV-CAM-HD19-HP-(_._MM-__)

The HRS pigtail includes a cable that extends from the back of the camera, to a junction with built-in menu control and then to connections.  The cable extends 17.5″ from the back of the camera to the junction with individual breakouts extending another 8″.  Breakouts include: HD Video (BNC), NTSC/PAL Video (BNC), and Power (HRS LF07WBJ-6P).

HRS Integrated Pigtail Connector (for Rugged Video Systems): RV-CAM-HD19-IP-(_._MM-__)

The integrated pigtail option features a 6-pin Hirose LF series connector built directly into the back of the camera.  This connector includes pins for: HD Video, NTSC/PAL, Joystick OSD Control, and Power.  By combining all signals into one connector, these cameras can be connected with a single cable for both power and video.  This camera can be used with specialty Rugged Video systems wired for a single cable, or with the use of a breakout cable with virtually any video equipment.  The RV-CAM-HD19-IP also ships with a breakout cable allowing for setup, testing, and joystick control for setting adjustments.

The standard pigtail includes a cable that extends from the back of the camera, to a junction with built-in menu control and then to connections.  The cable extends 17.5″ from the back of the camera to the junction with individual breakouts extending another 8″.  Breakouts include: HD Video (BNC), NTSC/PAL Video (BNC), and Power (2.1×5.5mm Barrel).

Integrated HRS Connector: RV-CAM-HD19-IC-(_._MM-__)

The integrated connector option features a 6-pin Hirose LF series connector built directly into the back of the camera.  This connector includes pins for: HD Video, NTSC/PAL, Joystick OSD Control, and Power.  By combining all signals into a single connector these cameras can be connected with single cable for both power and video.  This camera can be used with specialty Rugged Video systems wired for a single cable, or with the use of a breakout cable with virtually any video equipment.  The RV-CAM-HD19-IC also ships with a breakout cable allowing for setup, testing, and joystick control for setting adjustments.

The pinout for this connector is as follows:

1. +12VDC

2. Power Ground

3. NTSC/PAL Video

4. Joystick Key

5. SDI Video

6. SDI Ground

R44 with Generic Pigtail: RV-CAM-HD19-R44-(_._MM-__)

The R44 version of this camera with a generic pigtail is specifically built to be installed in the Horizontal stabilizer of the R44.  A single pigtail extends from the camera to a breakout connection which connects inside the boom.  Once broken out the cable has the standard connections of the Generic Pigtail.  Please contact a sales rep for any questions about this configuration.

R44 with HRS Pigtail (for Rugged Video Systems): RV-CAM-HD19-R44-HP-(_._MM-__)

The R44 version of this camera with a HRS pigtail is specifically built to be installed in the Horizontal stabilizer of the R44.  A single pigtail extends from the camera to a breakout connection which connects inside the boom.  Once broken out the cable has the connections of the HRS pigtail designed to be used with Rugged Video systems.  Please contact a sales rep for any questions about this configuration.

RS-485 Option: RV-CAM-HD19-IP-485-(_._MM-__) & RV-CAM-HD19-IP-485-(_._MM-__)

The HD19 RS-485 option allows the operator to adjust camera settings and configuration on the fly using a simple serial API.  Rugged Video provides protocol documentation and example commands to get you started.  Available on the Integrated Connector version of HD19 – specify the RS-485 option when ordering.

Lenses: RV-LENS-M12-__.__MM-__

The HD19 lens is protected by a scratch resistant polycarbonate window and sealed aluminum hood.  For the most demanding applications, a nearly scratch-proof Sapphire window is also available.  The HD19 camera has an IR cut filter installed on the image sensor by default.  Because the IMX327 sensor is sensitive to NIR wavelengths, daylight images would appear with a reddish tint without a filter.  Some lenses also have IR coatings or IR cut filters installed.  IR-filtered lenses are denoted with the “IR” suffix in the part number.

The HD19 Micro HD Bullet Camera has the option of lenses from 160 degree wide angle to 8 degree zoom.  Lenses are a fixed focal length M12 or S-Mount type with an adjustable focus.  Lenses which are listed as “Not compatible with front hood” are too large for the waterproof lens hood/cover, and are recommended for interior applications only.

When referring to a single “FOV” angle, Rugged Video literature is considering the diagonal FOV; however, for many applications it is important to also know the horizontal and vertical angles.  The table below lists the actual FOV angles measured using most standard lenses with the HD19 camera.  To illustrate the effects of lens distortion, we have measured FOV at both the center and the edges of the image.  Measurements are provided for reference only and may be slightly different than those measured by different methods.

 Rugged Video M12 Lens FOV Chart

Illustration of Lens FOV and Distortion Effects

Additional focal lengths and vari-focal lenses are available as special order options.  While most lenses and lens hoods are stocked, some less common waterproof lens hoods may be non-stock with leadtimes of 4-8wks.

2.8mm – 25yds	3.6mm – 25yds	4mm – 25yds
6mm – 25yds	8mm – 25yds	12mm – 25yds
16mm – 25yds

The HD19 features a standard 1/4″-20 mounted boss on the back of the camera and a wrap around collar for use with standard camera mounts.  The aluminum collar is designed to reduce vibration and stress, by supporting the camera from the center mass.

Aluminum Collar (included): RV-10098M

Available Mounts

A number of mounting options are available for the HD29, each using the standard 1/4″-20 stud.

Big Mite – is a cast aluminum collar, machined ball, and spud. The spud can be bolted directly to a solid surface using a #8 to 1/4″ flat machine screw.  The collar is then clamped to the spud and locks the ball in place.  The Big Mite is a larger version of the MiniMite designed to support larger cameras in high vibration environments.	Bite Mite Mount with Spud Base.
Mini Mite – is a cast aluminum collar, machined ball, spud, and extension with a flat base option. The spud can be bolted directly to a solid surface using a #4 to #10 flat machine screw.  The collar is then clamped to the spud and locks the ball in place.  Alternatively the spud can be affixed to the flat base which can be attached to a solid surface using 4 x #4 or #6 screws.  The Mini Mite is designed for smaller cameras like the HD29, HD19, or HD23.	Mini-Mite Mount, with Spud Base, Flat Base, and Extension.
Ultra-Clamp Mount – is a cast aluminum frame with a poly-carbonate injection molded adjustment attachment.  This mount is clamped to a secure bar or flat with a hand screw.  Additionally the top may be removed and mounted directly to any surface using a 1/4″-20 screw.  This mount can hold any size Rugged Video camera.	Ultra Clamp Mount with Adjuster Arm
Locking Suction Mount – Is an injection molded poly-carbonate mount with the same aluminum collar and ball as the Big Mite.  The suction mount features a wide cup that can attach to any smooth, hard, clean surface.  The suction cup is secured with a lever that creates additional vacuum within the cup.  This mount can hold any Rugged Video camera, but should only be used inside the cockpit for portable installations.  The mount is secured with air-pressure and thus should be tethered to avoid injury should a change in pressure occur, or the mount was to lose pressure.	Locking Suction Mount
2.1″ Pedestal Mount – is a cast aluminum collar, machined ball, and formed steel flat base with overall height of 2.1″. The base can be attached directly to a solid surface using 3 x #4 screws.  The ball is secured with friction by using a winged screw.  The pedestal is designed for smaller cameras like the HD29, HD19, or HD23.	Pedestal Mount

Blue Sky Helicopters Flight Tour – Sydney, Australia

12 Apostles Helicopters Flight Tour – Gold Coast, Australia

Makani Kai Helicopters Flight Tour – Hawaii

Helicopter Flight Services Flight Tour – New York